



Connect your 16-pin OBD2 diagnostic scan tool to 1990s and early-2000s Toyota and Lexus vehicles with the GeekAuto Toyota 17-Pin OBD1 to 16-Pin OBD2 Diagnostic Adapter Cable. Designed for older Toyota models equipped with the 17-pin diagnostic connector (DLC2), this adapter enables compatible multi-system scan tools to communicate with legacy Toyota engine and chassis ECUs.
Important Compatibility Notes (Scanner & Port Check)
1. Scanner Requirement: This is a passive pinout adapter cable (no built-in chip or software). Because pre-2001 Toyota 17-pin sockets use Toyota's proprietary OBD1 / M-OBD protocol rather than standard OBD2, basic generic ELM327 code readers will not communicate. Pair this cable with a multi-system diagnostic scanner that explicitly supports Toyota OBD1 17-pin protocols (such as Autel, Launch, Vident, or Foxwell).
2. 17-Pin vs. 22-Pin: Toyota used both a 17-pin connector (often located inside the cabin near the lower dash/fuse box) and a rectangular 22-pin connector (under the bonnet). Please check your vehicle's socket before ordering.
2. 17-Pin vs. 22-Pin: Toyota used both a 17-pin connector (often located inside the cabin near the lower dash/fuse box) and a rectangular 22-pin connector (under the bonnet). Please check your vehicle's socket before ordering.
Key Features & Benefits
- Exact Toyota 17-Pin Fitment: Precision-molded 17-pin male connector with alignment keying ensures a snug, reliable connection to the factory Toyota diagnostic port.
- Standard 16-Pin OBD2 Female Interface: Connects directly to your 16-pin OBD2 diagnostic tablet, VCI interface, or scanner main lead.
- Direct Port Power: Draws 12V battery power and ground straight from the diagnostic socket—no external battery jumper clips needed.
- Workshop-Grade Durability: Heavy-duty automotive cabling with reinforced strain-relief boots built for garages and DIY enthusiasts.
Common Compatible Toyota & Lexus Models (Approx. 1990–2000)
| Vehicle Category | Common Models (Equipped with 17-Pin Diagnostic Port) |
|---|---|
| 4WD, Utes & Vans | Land Cruiser (80 / 90 Prado / Early 100 Series), Hilux, Hilux Surf / 4Runner, HiAce, Estima / Previa |
| Passenger Cars & JDM | Camry, Corolla, Celica, Corona, Carina, Starlet, Crown, Mark II / Chaser, MR2, Supra |
| Lexus Models | Early LS400, GS300, ES300, LX450 (equipped with 17-pin diagnostic socket) |
Specifications & Package Contents
- Vehicle-Side Connector: 1x Toyota 17-Pin Male Plug
- Scanner-Side Connector: 1x Standard 16-Pin OBD2 Female Socket
- Package Includes: 1x Toyota 17-Pin to 16-Pin OBD2 Diagnostic Adapter Cable
Note: Please check your vehicle's diagnostic socket to confirm whether it uses the 17-pin or rectangular 22-pin connector before ordering. Need help confirming scanner compatibility? Contact the GeekAuto NZ team anytime.