





Connect your 16-pin diagnostic scan tool to 1990s Subaru vehicles with the GeekAuto Subaru 9-Pin OBD1 to 16-Pin OBD2 Diagnostic Adapter Cable. Designed for pre-1999 Subaru models (including Japanese domestic market / JDM imports) equipped with the 9-pin Select Monitor (SSM1) diagnostic connector, this plug-and-play adapter converts the factory 9-pin socket into a standard 16-pin OBD2 female interface.
Important Compatibility Notes (9-Pin Connector & Scanner Protocol)
1. Check Your Under-Dash Connector: Fits classic Subaru vehicles equipped with the yellow/white 9-pin diagnostic plug located in the driver's footwell / under-dash kick panel. (Note: Late-1990s/2000+ Subaru models equipped with a 16-pin trapezoidal dash socket do not require this cable.)
2. SSM1-Capable Scan Tool Required: This is a passive pinout adapter cable (no built-in chip or protocol converter). Because 9-pin Subaru vehicles communicate over the legacy Subaru Select Monitor I (SSM1) protocol rather than standard OBD2, basic generic ELM327 code readers will not work. Pair this cable with a multi-system diagnostic scanner that supports Subaru SSM1/OBD1 protocols (such as Launch, Autel, or Vident).
2. SSM1-Capable Scan Tool Required: This is a passive pinout adapter cable (no built-in chip or protocol converter). Because 9-pin Subaru vehicles communicate over the legacy Subaru Select Monitor I (SSM1) protocol rather than standard OBD2, basic generic ELM327 code readers will not work. Pair this cable with a multi-system diagnostic scanner that supports Subaru SSM1/OBD1 protocols (such as Launch, Autel, or Vident).
Key Features & Benefits
- Exact Subaru 9-Pin Fitment: Precision-molded 9-pin male plug locks securely into the factory Subaru Select Monitor diagnostic socket.
- Standard 16-Pin OBD2 Female Socket: Connects directly to your 16-pin diagnostic tablet main lead or handheld scanner.
- Ideal for Classic JDM & NZ-New Subarus: Enables fault code reading and live sensor diagnostics on 1990s Subaru models when paired with a compatible SSM1 scanner.
- Workshop-Grade Durability: Thick insulated automotive cabling with reinforced strain-relief boots built for garage and enthusiast use.
Common Compatible Subaru Models (Approx. 1990–1998 with 9-Pin Port)
| Subaru Model | Approx. Years & Application Notes (Verify 9-Pin Port) |
|---|---|
| Impreza / WRX / STi (GC8 / GF8) | 1992 – 1998 (especially JDM imports equipped with the under-dash 9-pin Select Monitor plug) |
| Legacy / Liberty (BC / BF / BD / BG) | 1990 – 1998 models fitted with the 9-pin diagnostic socket |
| Forester (SF Early) | 1997 – 1998 early models equipped with the 9-pin diagnostic plug |
| Subaru SVX / Alcyone | 1991 – 1997 models fitted with the 9-pin diagnostic connector |
Specifications & Package Contents
- Vehicle-Side Connector: 1x Subaru 9-Pin Male Diagnostic Plug
- Scanner-Side Connector: 1x Standard 16-Pin OBD2 Female Socket
- Package Includes: 1x Subaru 9-Pin to 16-Pin OBD2 Diagnostic Adapter Cable
Note: This is a passive adapter cable only (diagnostic scan tool not included). Please inspect your vehicle's under-dash area to confirm it has the 9-pin plug before ordering. Need help selecting a Subaru-capable diagnostic scanner? Contact the GeekAuto NZ team anytime.