




Unlock full diagnostic, bi-directional control, and module programming access on your 2018–2020 Dodge RAM 1500 & 2500 (including 6.7L Cummins Diesel) with the GeekAuto Security Gateway (SGW) Bypass OBD2 Cable. Engineered for a clean, under-dash plug-and-play installation—no radio or dashboard disassembly required.
Why Do You Need an SGW Bypass Cable?
Starting in 2018, FCA equipped RAM trucks with a factory Security Gateway Module (SGW) that blocks aftermarket scan tools from writing data to the vehicle. Without a bypass cable, most OBD2 scanners can only read basic fault codes—you will be locked out of clearing codes, running active tests, calibrating tyre sizes, or using AlfaOBD and tuning software.
Key Features & Benefits
- No Dash Removal Required: Connects directly under the steering column via the factory CAN bus Star Connector and OBD2 port—installs in under 5 minutes without prying open trim panels.
- Full Diagnostic & Coding Access: Enables clearing DTC fault codes, bi-directional active tests, DPF regeneration, TPMS relearn, and vehicle customization via AlfaOBD, Autel, Launch, Snap-on, and other OBD2 diagnostic tools.
- OEM-Style Pass-Through Design: Features a 16-pin OBD2 male plug, a snap-in 16-pin OBD2 female replacement port, and a 2-pin CAN bus connector so your OBD2 port remains cleanly mounted and ready for daily use.
- Durable Automotive-Grade Build: Heavy-duty insulated wiring and precision-molded connectors ensure stable, interference-free CAN bus communication.
Vehicle Compatibility
| Make / Model | Model Years | Engine / Notes |
|---|---|---|
| Dodge RAM 1500 | 2018, 2019, 2020 | 3.6L V6, 5.7L HEMI V8, 3.0L EcoDiesel (Under-dash CAN bus connection) |
| Dodge RAM 2500 | 2018, 2019, 2020 | 6.7L Cummins Turbo Diesel & 6.4L HEMI V8 |
Quick Installation Guide
- Turn the vehicle ignition OFF and locate the factory OBD2 port and CAN bus Star Connector block under the driver-side dashboard (near the steering column).
- Unclip the factory 16-pin OBD2 port from its under-dash bracket and plug it into the 16-pin male connector of the bypass cable.
- Snap the bypass cable's 16-pin female port back into the factory OBD2 mounting bracket.
- Plug the 2-pin connector into an open slot on the CAN bus Star Connector block under the dash.
- Connect your OBD2 scanner or programmer to the newly mounted OBD2 port—ready to scan, clear codes, and program!
Specifications & Package Contents
- Connectors: 1x 16-Pin OBD2 Male, 1x 16-Pin OBD2 Female (Bracket Mount), 1x 2-Pin CAN Bus Plug
- Installation Type: Plug & Play (Reversible, Zero Wire Cutting)
- Package Includes: 1x Security Gateway (SGW) Bypass OBD2 Adapter Cable
Note: Please verify your vehicle's under-dash connector layout before ordering. Need help checking compatibility with your diagnostic scan tool? Contact the GeekAuto NZ support team anytime.