




Unlock full OBD2 diagnostics, fault code clearing, DPF regeneration, and BCM configuration on your 2018–2020+ RAM truck in seconds—without removing the radio or dashboard—with the GeekAuto RAM 1500 / 2500 / 3500 Security Gateway (SGW) Bypass Harness. Designed specifically for RAM trucks equipped with an under-dash CAN STAR junction block, this plug-and-play T-harness draws power inline from the factory OBD2 connector while plugging directly into an open CAN-Bus port under the dash.
Quick 30-Second Under-Dash Installation (No Dash Disassembly)
1. Inline Power Connection: Unclip the factory OBD2 port under the driver-side dash and connect this harness inline to supply clean 12V power and ground.
2. Direct CAN-Bus Access: Plug the small 2-pin CAN connector into an open slot on the under-dash green/white CAN STAR connector block.
3. Scan & Configure: Connect your 16-pin OBD2 scan tool or Bluetooth adapter to the female OBD2 socket. Always disconnect the bypass harness before dealer service visits.
2. Direct CAN-Bus Access: Plug the small 2-pin CAN connector into an open slot on the under-dash green/white CAN STAR connector block.
3. Scan & Configure: Connect your 16-pin OBD2 scan tool or Bluetooth adapter to the female OBD2 socket. Always disconnect the bypass harness before dealer service visits.
Key Features & Benefits
- No Radio or Dash Removal Required: Avoids the hassle of pulling the centre stack/head unit to reach the behind-dash SGW module on 2019+ RAM trucks.
- Full Bidirectional Access: Enables fault code clearing, manual DPF regeneration, live engine/transmission data, active tests, and module programming (tire size calibration, TPMS thresholds, lighting options).
- Wide Scanner & App Compatibility: Works seamlessly with professional diagnostic tablets (Autel, Launch, Vident, Foxwell) as well as popular RAM tuning and diagnostic tools including AlfaOBD, JScan, OBDLink MX+, EFI Live, and HP Tuners.
- Factory-Style Inline T-Harness: Zero wire cutting or splicing—heavy-duty automotive insulation with reinforced strain-relief boots built for workshop and off-road use.
Compatible RAM Vehicles (2018–2020+ with Under-Dash CAN STAR Block)
| Truck Model | Model Years & Engine Coverage |
|---|---|
| RAM 2500 / 3500 Heavy Duty | 2018 – 2020+ (6.7L Cummins Turbo Diesel & 6.4L HEMI V8) |
| RAM 1500 (DT New Body & DS Classic) | 2018 – 2020+ models equipped with the under-dash CAN STAR connector block (5.7L HEMI, 3.0L EcoDiesel, 3.6L Pentastar) |
Specifications & Package Contents
- Vehicle-Side Connectors: 1x Inline OBD2 Power Pass-Through Harness + 1x 2-Pin CAN Star Connector Plug
- Scanner-Side Connector: 1x Standard 16-Pin OBD2 Female Socket
- Package Includes: 1x RAM 1500 / 2500 / 3500 SGW Under-Dash Bypass Cable
Note: Please verify your RAM truck has the accessible under-dash CAN STAR junction block before ordering. Need help choosing a RAM-capable diagnostic scanner? Contact the GeekAuto NZ team anytime.